1MHz, PWM Controlled, Step-Up DC/DC Converter, Ceramic Capacitor Compatible
The XC9119 series is 1MHz, PWM controlled step-up DC/DC converter, designed to allow the use of ceramic capacitors. With a built-in 2.0Ω switching transistor, the XC9119 series can easily provide a step-up operation by using only a coil, a diode, a capacitor, and a resistor, connected externally.
Since output voltage up to 19.5V (Maximum Lx operating voltage: 20V) can be derived with reference voltage supply of 1.0V (±2.0%) and external components, the series can easily supply high voltage for various general-purpose power supplies, LCD panels and organic EL displays.
With a high switching frequency of 1.0MHz, a low profile and small board area solution can be achieved using a chip coil and an ultra small ceramic output capacitor.
With the current limit function (400mA (TYP.):VDD=3.6V), a peak current, which flows through built-in driver transistors can be limited.
Soft-start time can be adjusted by external resistors and capacitors. The stand-by function enables the output to be turned off (CE ’L’), that is, the quiescent current will be less than 1.0μA.
Feature
High Efficiency | 86%(VOUT=15V,VDD=3.6V,IOUT=10mA) |
Stand-by Current | ISTB=1.0mA(MAX.) |
Load Capacitors | Low ESR capacitors compatible |
Current Limit | 400mA(VDD=3.6V) |
Control | PWMControl |
Operating Voltage Range | 2.5V~6.0V |
Output Voltage Range | Up to 19.5V externally set-up Reference voltage1.0V+2.0% |
Oscillation Frequency | 1.0MHz±20% |
On Resistance | 2.0Ω(VDD=3.6V,VDS=0.4V) |
Typical Application Circuit
Technical Document
Packages
XC9119 Series Part Numbers
Part number | Sample | Reference Voltage | Oscillation Frequency | Packages | EDA | Online Store |
---|---|---|---|---|---|---|
|
|
|
|
|
|
|
XC9119D10AER-G | FB voltage 1.0V | 1MHz | USP-6C | |||
XC9119D10AMR-G | FB voltage 1.0V | 1MHz | SOT-25 |
Inquiries About XC9119
Please wait for a while until the form is displaying.
If the form is not displaying, please contact us from inquiry form.