Ultra Small PLL Clock Generator ICs with Built-In Divider/Multiplier Circuits
The XC25BS8 series is an ultra small PLL clock generator IC which can generate a high multiplier output up to 4095 in a small jitter from an input frequency as low as 8kHz. The series includes a divider circuit, phase/frequency comparator, charge pump, and VCO so it is possible to configure a fully operational circuit with a few external components like one low-pass filter capacitor. The Input divider ratio (M) can be selected from a range of 1 to 2047, the output divider ratio (N) can be selected from a range of 1 to 4095 and they are set internally by using laser timing technologies.
Output frequency (fQ0) is equal to input clock frequency (fCLKin) multiplied by N/M. Output frequency range is 1MHz to 100MHz. eference clock from 8kHz to 36MHz can be input as the input clock. The IC stops operation and current drain is suppressed when a low level signal is input to the CE pin which greatly reduces current consumption and produces a high impedance output.
The setting of the input divider ratio (M), output divider ratio (N), and charge pump current (Ip) are factory fixed semi-custom. Please advise your Torex sales representative of your particular input/output frequency and supply voltage specifications so that we can see if we will be able to support your requirements. The series is available in small SOT-26W and USP-6C.
Feature
Input Frequency Range | 8kHz~36MHz*1 |
Output Frequency | 1MHz~100MHz(fQ0=fCLKin×N/M)*1 |
Output Divider(N) | Selectable from divisions from 1 to 4095 *1 |
Input Divider(M) | Selectable from divisions from 1 to 2047 *1 |
Operating Voltage Range | 2.50V~5.50V*1 |
Low Quiescent Current | CMOS with stand-by function *2 (10μA, MAX. when stand-by) |
*1 The series are semi-custom products. Specifications for each product are limited within the above range. ,The input frequency range is set within ±5% of customer’s designated typical frequency.,Please note that setting of your some requirements may not be possible due to the specification limits of this series. *2 When the IC is in stand-by mode, the output becomes high impedance and the IC stops operation.
Typical Application Circuit
Packages
XC25BS8 Series Part Numbers
Part number | Sample | EDA | Online Store |
---|---|---|---|
|
|
|
|
Inquiries About XC25BS8
Please wait for a while until the form is displaying.
If the form is not displaying, please contact us from inquiry form.